To be honest this is the only point where I find DPL sub-par w.r.t Lightroom.
While in Lightroom moving the sliders really feel like touching only the part you want to modify (highlights or shadow), in DPL it seems that the whole image is modified.
Additionally, pushing the sliders (in the selective tone control panel) to the point where I’m happy with how the highlights/shadows have been brought in the “visible” tonal range produces a kind of tonal compression of other parts of the image.
What is almost sure is that Lightroom uses not only a tone metric to identify the highlights/shadows but also a spatial constraint.
Would it be possible to have DPL work and rely more heavily on “spatial” space instead of just the “tonal” space to segmentate the part that should be affected by the relevant highlight/shadow slider?
This is a well known and often discussed issue with PhotoLab. In my experience the best way to address it is to use the highlight and shadows sliders in Local Adjustments to target those areas that need highlight and shadow detail recovery.
Detail recovery in this before and after image was accomplished using the local adjustment highlights and shadows sliders rather than the global sliders.
This is definitely the best way to go. People have posted examples of LR “highlight recovery” before and I always find they are basically toning down an over-exposed area to be somewhat flat grey. My rule is - if you can’t recover highlights and keep them white, you have over-exposed the image - scrap it
There are already several feature requests to make the adjustment of highlights and shadows in PL’s Selective Tone palette more like Lightroom’s. Perhaps this one is already duplicated in one of those? For example:
I agree that Highlight/shadow recovery could be improved.
Something more along the lines of Shadows/Highlights in Photoshop would target the areas you want to adjust more precisely. “Smart Lighting” is a bit hit or miss, even when you use the “Spot Weighted” tool. “Selective Tone” is not always selective enough.
I do sometimes use the “Local Adjustments” feature with good effect, adjusting the highlights bar.
+1 for better/easier highlight recovery. I am not very pleased with the fact that I need to use a lot of different tools including local adjustments and whatnot to do what I can do with a single slider in all my other raw processors. The “selective tone” tool is more something to achieve special effects, a bit “HDR-Tonemapping”-like, more than effective selective control over hightlights and shadows. In fact it’s everything but “selective”! When I move the highlight slider down to bring highlights back, this affects the whole image making it completely dull, then I must counteract this with other tools… that’s not a very efficient workflow, very counter intuitive.
Maybe the “selective tone” tool is appreciated by some, so I’d suggest moving it to the “effects” section and add a proper highlights/shadows/white/blacks tool to the basic adjustments panel.
The truth of the matter is, if you have over-exposed an image, there is absolutely no way to recover those lost highlights - nothing, nada, zip. All most other software does is to dull them down from pure white or make an artificially intelligent guess at what might have been there.
The cure for blown highlights is to get to know your camera better and ensure that the exposure is correct and within the limits of the sensor.
However, if your image is only just within limits, you can always try the highlight fine contrast toll from FilmPack along with working with the tone curve instead of the selective tone tool.
I don’t think that anybody is talking about blown highlights.
The tone controls in LR work differently to PL - especially, the highlight control. It restricts itself to just the highlights and not the rest of the photo as PL does. Thus it is possible to smooth out the highlight and blend it into the rest of the photo. Examples would be sky and hot spots on a person’s skin.
I have a photo of a model taken with flash. There is a hot spot on her arm from the flash. In LR, this is smoothed out very easily to blend the hot spot with her skin. The same photo in PL requires messing around with local adjustments. Afterwards, it still does look as good as the LR version.
Another example is if you ETTR. In this case, highlight recovery in LR is far better than PL.
No please, this doesn’t help at all. I know you think that, I searched and read some of your replies, but no, sorry.
I’ve been doing this for decades, I absolutely know what I’m talking about, I use all major raw converters, I know what I can do with my files.
Indeed. The highlight slider is completely unusable to move highlights that are beyond the right side of the histogram back into the picture, so to speak. So we need to apply tons of workarounds and cascading adjustments, while in competing software it’s just a matter of bringing a single slider labeled “highlights” down. (And were not even talking about “highlight reconstruction”…)
I understand that each software has it’s own algoritms, but this is a basic function of a raw processor. Originality and creativity is great, but please don’t move the steering wheel to the back seat and the throttle in the trunk!
in highlight recovery the highlight selective tone and highlight contrast slider should be connected.
when i need to pull highlight down in global manner i use -20 highlight toneslider and -20 highlightcontrast instead of only selective tone. (to prevent greying blobs in the whiteparts i lower contrast/details.
so in the first attemps they could be connected and got lose/disconnected if i attempt to change contrast from the original tone setting say in example above: -20 tone and -15 contrast.
(all of this is only possible when you have Filmpack elite)
my way is:
set smartlighting boxes at 15%
then correct global exposure compensation (midtones)
adjust highlight and shadow (tone and contrast)
and or use local adjustment tools.
(a Dehaze function is Fine contrast works fine on shadows and sometimes highlighted walls to get some detail back. (also a Filmpack feature)
I tried a lot of your suggestions, doing my best, and ended up using Highlight contrast, selective tone, tone curve to produce the image on the left. On the right, some basic adjustments in Lightroom. (I decided not to post the usual “blown out sky” image ) DXO jpeg had DeepPrime applied, Lightroom has default sharpening, no noise reduction at all which explains perhaps the slight “waxiness” of the DXO jpeg, but that’s not an issue because easily correctible and it’s not the point here. Even though at first sight, these images look close enough, I see many a detail that illustrates that I got stuck with the highlights in DPL5. For instance, the leather on the tank and seat, the reflection on the front mudguard are details I would discard the edit for. I also see the DXO image being overall a bit duller (because of the highlight slider: eg the bike’s signal light), which I tried to counteract but I could find a single parameter that didn’t lift the highlights again. (Hopegfully I embedded the right profile because screenshots from Wide Gamut screens don’t work for the web…)